Why is the data rate low to my Honeywell Small SATCOM Security Sensors terminal?
A low data rate to your Honeywell Security Sensors terminal can be caused by low signal quality. Disconnect and reconnect to background if there is a low rate streaming connection. Wait for the network should adapt if there is network contention.
What to do if Honeywell Security Sensors Satcom doesn’t come on?
If your Honeywell Security Sensors Satcom doesn’t come on and the LED is off, check that 28V DC is being supplied. Also, the terminal works with some power supplies and not others, so check that the terminal inrush current is not causing the supply voltage to drop below 27v. Dry out the unit if there is water inside.
What causes poor latency on Honeywell Small SATCOM?
Poor latency on Honeywell Security Sensors can be caused by a background connection; switch to a streaming connection.
Why does UAV’s GPS fails to lock when using Honeywell Small SATCOM?
If a UAV's GPS fails to lock, it may be due to interference from Satcom emissions. Increase isolation between the Satcom antenna and GPS antennas.
U.S. government export regulations for the items.
Grants a limited, personal, non-transferable license to use materials.
Outlines limitations on selling, renting, leasing, reverse engineering, or modifying materials.
Lists the applicable components for the SATCOM system.
Provides a table of revision numbers and dates.
Details changes made in the current revision and their effectivity.
Explains how to effectively use the manual and its features.
Provides information on how to contact customer support.
Lists and defines acronyms and abbreviations used in the manual.
General information about the Small SATCOM system.
Describes the indoor unit and its functionalities.
Provides a description of the antenna and its characteristics.
Defines the scope of the Inmarsat network description and equipment class.
Overviews the Honeywell SwiftBroadband SATCOM system.
Discusses factors affecting data rate and performance.
General considerations before starting the installation process.
Details the mechanical aspects of installing the system components.
A checklist of steps to validate the installation.
Checks to ensure flight safety and GPS performance after installation.
General overview of the system's operational capabilities.
Details the different modes of operation for the SATCOM system.
Temperature ranges for the antenna.
Temperature ranges for the indoor unit.
Instructions for cleaning the indoor unit and antenna.
Guidelines for yearly inspection of components and cables.
Information on servicing and repairability of the terminal.
Common problems encountered during installation.
Common problems encountered during operation.
General information including reference documents.
Information on FCC and IC licensing for radio transmission.
Instructions for configuring the VPN server on the ground side.
Instructions for configuring the VPN client on the air side.
General| Category | Security Sensors |
|---|---|
| Brand | Honeywell |
| Product Name | Small SATCOM |
| Manufacturer | Honeywell |
| Communication | SATCOM |
To Next Page