Honeywell ST700 - 3. ST 700 FF Pressure Transmitter Configuration; 3.1 Importing the ST 700 FF Device Description (DD) files

Page 8 FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide Revision 2.0
3. ST 700 FF Pressure Transmitter Configuration
3.1 Importing the ST 700 FF Device Description (DD) files
Importing the DD to Experion PKS
ATTENTION
Experion release compatibility
Experion Release DD Compatibility
410 Yes
400.2 + CP3 Yes
311.3 Yes
The steps in the following procedure are specific to Experion only.
Step Action
1
From the Control builder main screen, click Fieldbus Device Description
Import .
OR
Select File > New > Type >Fieldbus Device
2
You can Import the DD using one of the following steps:
• Choose Browse to locate the folder where you have stored the DD file.
• Select the required folder, and click OK.
• Select the DD from the Device List, and click OK.
2
The following dialog box appears,
Click OK
3
Type the Device Type Name, and then click Save As.