Page 42 FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide Revision 2.0
Parameter Description
UNIT_TYPES Unit selection for screen process value. Appropriate units need
to be selected based on the configured parameter. If desired
units are not present, 'custom' may be selected. The
UNIT_TYPES is present in all the eight screens:
UNIT_TYPES_1, UNIT_TYPES_2, UNIT_TYPES_3,
UNIT_TYPES_4, UNIT_TYPES_5, UNIT_TYPES_6,
UNIT_TYPES_7 and UNIT_TYPES_8
CUSTOM_UNIT Character string to represent custom units. This value is used
when Unit type of 'custom' is selected. Size: 8 Characters. The
CUSTOM_UNIT is present in all the eight screens:
CUSTOM_UNIT_1, CUSTOM_UNIT_2, CUSTOM_UNIT_3,
CUSTOM_UNIT_4, CUSTOM_UNIT_5, CUSTOM_UNIT_6,
CUSTOM_UNIT_7 and CUSTOM_UNIT_8
CUSTOM_TAG Tag to be displayed for the screen. Length: 14 Characters. The
CUSTOM_TAG is present in all the eight screens:
CUSTOM_TAG_1, CUSTOM_TAG_2, CUSTOM_TAG_3,
CUSTOM_TAG_4, CUSTOM_TAG_5, CUSTOM_TAG_6,
CUSTOM_TAG_7 and CUSTOM_TAG_8.
DISPLAY_TEMPLATE Represents the display screen template. Possible Values:
a) PV : Regular PV value is displayed
b) None: Screen will not be seen.
The DISPLAY_TEMPLATE is present in all the eight screens:
DISPLAY_TEMPLATE_1, DISPLAY_TEMPLATE_2,
DISPLAY_TEMPLATE_3, DISPLAY_TEMPLATE_4,
DISPLAY_TEMPLATE_5, DISPLAY_TEMPLATE_6,
DISPLAY_TEMPLATE_7 and DISPLAY_TEMPLATE_8.
DECIMALS Number of digits to display after the decimal point. Range: 0 - 3.
DECIMALS is present in all the eight screens: DECIMALS_1,
DECIMALS_2, DECIMALS_3, DECIMALS_4, DECIMALS_5,
DECIMALS_6, DECIMALS_7 and DECIMALS_8
PV_LOLIM Not applicable for ST 700.
PV_HILIM Not applicable for ST 700.
TREND_DURATION Not applicable for ST 700.
PREF_UNITS Preferred Units.
Attributes
Supported Modes
The block supports the following modes:
• AUTO (Automatic)
• OOS (Out of Service).
Alarm Types
The block supports standard block alarms (see section 3.2).
To Next Page
Loading...
