Honeywell STT750 SmartLine - 3.4.3. Bracket Mounting Procedure

Page 2 STT750 Temperature Transmitter User’s Manual Revision 4
Figure 1 – STT750 Major Assemblies
Figure 2 – Electronics Housing Components
1.2.2. Functional Characteristics
The Transmitter measures process Temperature and outputs a signal proportional to the measured
process variable (PV), including 4 to 20mA.
An optional 3-button assembly is available to set up and make adjustments to the Transmitter. In
addition, a Honeywell Multi-Communication (MC) Toolkit (not supplied with the Transmitter) can
facilitate setup and adjustment procedures.
Housing adapter
may not be present
on all models