Page 8 STT750 Temperature Transmitter User’s Manual Revision 4
3.4. Mounting STT750 SmartLine Temperature Transmitters
3.4.1. Summary
Transmitter models can be attached to a two-inch (50 millimeter) vertical or horizontal pipe using
Honeywell’s optional angle brackets.
Honeywell’s optional wall mounting bracket is also shown below:
TRANSMITTER ENCLOSURE CAN BE ROTATED A TOTAL OF 90O FROM THE
STANDARD MOUNTING POSITION
Figure 4 – STT750 with adapter housing - Horizontal Wall Mounting
Figure 5 – STT750 No-Adapter Horizontal Wall Mounting
To Next Page
Loading...
