Owner’s Guide
12
1) Press Pgm. Period 1 for Monday is displayed.
2) To program another period, press Pgm to display that period.
3) To program another day, press Day to display that day (hold for 3 seconds to
select the entire week).
4) Press Hour and Min to set the period start time, or press Clear to skip
(cancel) the period (--:-- will be displayed).
5) Repeat steps 2 to 4 to program another period.
6) Press Mode/Ret to return the thermostat to normal display.
NOTE
: The thermostat will automatically return to normal display if no button is
pressed for 60 seconds.
Modifying the schedule
69-1803ES-03.book Page 12 Friday, March 1, 2013 10:13 AM
To Next Page
Loading...
Need help?
General
