TL8230A1003
7
Configuration switches are on the back of the faceplate.
Set the configuration switches
#Configurations Up Down
1Displayformat °F / 12 h °C / 24 h
2
Early Start
1
1. Early Start is used in Automatic mode only. When Early Start is enabled (on), the thermostat
determines when to start heating so the Comfort temperature is attained at the beginning of
periods 1 and 3. When Early Start is disabled (off), heating starts only at the beginning of
periods 1 and 3; thus there is a delay before the Comfort temperature is reached.
Enable Disable
3Not used
69-1803ES-03.book Page 7 Friday, March 1, 2013 10:13 AM
To Next Page
Loading...
