Owner’s Guide
16
Power supply
: 240/208 VAC, 50/60 Hz
Maximum load
: 15.0 A (3600 W @ 240 VAC)
(3120 W @ 208 VAC)
Heating cycle
: 15 minutes
Setpoint range: 40 °F to 86 °F (5 °C to 30 °C)
Display range: 32 °F to 158 °F (0 °C to 70 °C)
Resolution
: 1 °F (0.5 °C)
Data protection
: In the event of a power failure, most settings are saved. However
the time and Daylight Saving Time must be set if the power failure lasts more than 6
hours. The thermostat will return to the mode that was active prior to the power
failure.
Technical Specifications
69-1803ES-03.book Page 16 Friday, March 1, 2013 10:13 AM
To Next Page
Loading...
