Honeywell VM242A BasicMes-2 User Manual

Honeywell • All rights reserved MU2H-1054GE25 R0411
VM242A
BasicMes-2
HANDHELD FLOW MEASURING COMPUTER
CONTENTS
1
Introduction ...................................................................... 2
1.1 How to use these Instructions ............................... 2
1.2 Safety Guidelines.................................................. 2
2 Basic Information ............................................................. 2
2.1 Intended Use......................................................... 2
2.2 Before Use............................................................ 2
2.3 Scope of Delivery.................................................. 2
2.4 Names of the Components ................................... 3
2.5 Charging Batteries ................................................ 3
2.6 Replacing Batteries............................................... 3
2.7 Setup .................................................................... 3
3 Quick Start ....................................................................... 4
3.1 Flow Measurement using Valve Database............ 4
3.2 Flow Measurement after Direct Input of kv-value.. 5
4 Function overview ............................................................ 5
4.1 How to access the Main Menu .............................. 5
4.2 Valve Selection (“Select valve”) ............................ 5
4.3 Project Function (“Select project”)......................... 6
4.4 Flow Measurement (“Hydr. balancing”)................. 6
4.5 Temperature Measurement................................... 7
4.6 Leakage Test ........................................................ 7
4.7 Data Logging......................................................... 7
4.8 DP Measurement .................................................. 7
4.9 USB Data Exchange ............................................. 8
4.10 Print ...................................................................... 8
4.11 Save Measurements ............................................. 8
4.12 Data management ................................................ 8
4.13 Setup .................................................................... 8
4.14 Calibration............................................................. 8
5 PC Software..................................................................... 8
5.1 Overview............................................................... 8
5.2 System Requirements........................................... 9
5.3 Functions .............................................................. 9
6 Declaration of Conformity............................................... 10
7 Illustrations / Abbildungen / figures / figura..................... 11
8 Menu Structure............................................................... 12
9 Honeywell in EMEA and Asia Pacific ............................. 13
10 Data sheet...................................................................... 14
OPERATING INSTRUCTIONS

Honeywell VM242A BasicMes-2 Specifications

General

Brand	Honeywell
Model	VM242A BasicMes-2
Category	Handhelds
Language	English

Summary

Introduction and Basic Information

How to use these Instructions

Explains how to follow the step-by-step instructions for setup and operation.

Safety Guidelines

Provides essential safety instructions and warnings for using the device.

Intended Use

Describes the primary application of the BasicMes-2 in hydronic heating and cooling systems.

Before Use

Details pre-operation checks and initial setup requirements for the device.

Scope of Delivery

Lists all items included in the product package.

Device Components and Initial Setup

Names of the Components

Identifies and labels all parts of the BasicMes-2 device and its accessories.

Charging Batteries

Explains the process of charging the device's batteries and indicates charging status.

Replacing Batteries

Provides instructions on how to safely remove and install batteries in the device.

Setting Device Clock

Guides users through setting or changing the device's date and time.

Device Configuration and Quick Start

Other Setup Options

Lists and explains various configurable settings for the BasicMes-2 device.

Flow Measurement using Valve Database

Details how to perform flow measurements using the integrated valve database.

Valve Selection

Explains the process of selecting a valve from the device's internal database.

Quick Start and Function Access

Flow Measurement after Direct Input of kv-value

Guides users on performing flow measurements by manually inputting the kv-value.

How to access the Main Menu

Describes how to navigate to and access the main menu options of the BasicMes-2.

Valve Selection and Presetting

Select valves from the database and set presetting values for accurate measurements.

Project Function and Hydronic Balancing

Project and Riser Management

Organize measurements by creating and managing projects and risers.

Flow Measurement ("Hydr. balancing")

Describes the process for performing hydronic balancing flow measurements.

Measurement Functions

Temperature Measurement

Outlines how to perform and record temperature measurements using the device.

Leakage Test

Details the procedure for conducting and analyzing leakage tests.

Data Logging

Explains how to use the device for continuous data recording over time.

DP Measurement

Describes how to perform differential pressure measurements without flow calculation.

Data Handling and Maintenance

USB Data Exchange

Explains how to transfer data between the device and a PC via USB.

Print and Save Measurements

Guides on how to print results and save measurement data to projects.

Data Management

Covers functions for managing saved projects, risers, and measurements.

Calibration

Provides information on device calibration procedures and service.

PC Software Overview and Functions

PC Software Functions Overview

Gives a general overview of the functionalities offered by the PC software.

Project and Riser Data Management

Explains how to manage project and riser data using the PC software.

Valve Database Operations

Details how to manage the valve database via the PC software.

Data Up/Download and Print Reports

Describes data transfer between PC and device and report generation.

PC Software Advanced Features and Compliance

Displaying Test Results and Updating Firmware

Learn how to view test results and update the device's firmware.

Declaration of Conformity

Product compliance statement regarding electromagnetic compatibility.

Illustrations and Diagrams

Menu Structure Overview

Honeywell Contact Information

Technical Data Sheet

Product Application and Design

Application Description

Describes the primary use of the BasicMes-2 in hydronic heating and cooling systems.

Device Design and Features

Lists the components that make up the VM242A BasicMes-2 and its key capabilities.

Technical Specifications and Ordering

Key Technical Specifications

Provides detailed technical specifications for the device's performance and operation.

Units, Display, and Language Options

Details the units of measurement, display characteristics, and language options.

Scope of Delivery and Ordering Information

Reiterates included items and provides part numbers for ordering.

Accessories and Spare Parts

Available Accessories

Lists optional accessories available for the VM242A Series.

Spare Parts List

Lists available spare parts for the VM242A BasicMes-2 and related components.

Honeywell Support Information