Honeywell Vocollect - Installing the USB Driver on Windows 7 or Vista; Collecting Platform Debug Logs from A700 Devices; Accessories

| Talkman A700 | 73
4.
When prompted with Can Windows connect to Windows Update to search for software?, select No, not at
this time.
5.
Select Install from a list or specific location (advanced).
6.
Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7.
Select the TalkmanUsbSerial.inf file. If there is a driver warning, click Continue Anyway.
Installing the USB Driver on Windows 7 or Vista
When you connect an A700 device to your Windows PC, the PC will search for a USB driver to install. If the PC is
configured to search for drivers online and the connection succeeds, the driver will install automatically and the A700
device will be ready to use. If the automatic installation fails, follow these steps.
1.
Navigate to the .inf and .cat files in the USB Driver folder on the VoiceConsole software DVD and save both files
to your computer.
2.
Open Device Manager and locate Talkman USB Serial.
3.
Right click it and select Update Driver.
4.
Select Browse my computer for driver software.
5.
Select Let me pick from a list of device drivers on my computer.
6.
Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7.
Select the TalkmanUsbSerial.inf file. If there is a driver warning, or a prompt about proceeding, indicate that you
want to continue.
Collecting Platform Debug Logs from A700 Devices
When you connect an A700 device to your Windows PC, the PC will search for a USB driver to install. If the PC is
configured to search for drivers online and the connection succeeds, the driver will install automatically and the A700
device will be ready to use. If the automatic installation fails, follow these steps.
1.
Using a standard USB cable, connect the device to a computer.
2.
Power on the device.
3.
On your computer, run a serial terminal emulator, such as HyperTerminal, using the following settings:
• Bits per Second: 57600
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: None
The device transfers platform logs 30 seconds after connection and then once a minute after that. The results are
viewable within the serial terminal emulator window.
Accessories
Honeywell offers a variety of accessories for wearing, protecting, and facilitating the operations of Talkman and other
devices.
Handheld and other devices may require specific cables in order to use Honeywell accessories, such as headsets. See
the release notes for the Vocollect Voice software for your device for more information.