43-TV-25-30 Iss.6 GLO Aug 07 UK 97
• Script Timers - Script timers provide 20 independent timers to be used as desired, pre-
viously control and access of script timers was limited to maths functions for use in
script but this has now been extended allowing the timers to be controlled using the
event system, allowing them to be stopped, started and reset. Script timers can also be
viewed in
“Script Timers” on page 153. Access to timers via the Maths scripting
feature is still available, see
Table 14.4 on page 276.
• Play Sound - Sound effects can be used to alert the user that an event effect has
occurred. Set the Sub Type to Start to reveal two more menu options, Sound name and
Play Mode. The user can pick from a list of 20 different sounds these can be configured
to play a single time or repeat continuously. Please be aware that continuous mode
will repeat continuously until a corresponding “stop” event is triggered for that
sound. Also like ring tones the sounds themselves can be replaced on the recorder
with custom sounds. To update the sounds see
“Update Sounds” on page 136.
• Display Alert - Display alert as an event effect – this feature is available from within the
event system where the Alert Display can be used as an event effect to display a preset
or user defined marker.
Select Message Type as Preset to display a list of all available markers that have been
previously added to the recorder. To add Preset Markers go to “Preset Markers” on
page 98.
Select the Message Type as User Defined to enter your own text.
For more information on the Alert system and how to customise it see
“Error Alert”
on page 100.
• Batch - Batch controls can be used as the effect of an event occurring. An
event cause must be set up so that the effect of the event is to Start, Stop or
Pause a batch. Batches work using groups of pens so when setting up an
event with a batch control as a cause you must assign a group of pens. See
“Groups” on page 112.
• Reports - A report can be created as an effect of an event. Reports can be generated
on a periodical basis using event system to show daily/weeks/monthly totals, max mins,
averages etc. the reports can be printed, e-mailed as attachments or exported to exter-
nal media. Before a report can be run the report details must be entered in
“Reports
menu” on page 118.
To Next Page
Loading...
Need help?
General
