43-TV-25-30 Iss.6 GLO Aug 07 UK 145
Barcodes for Batch
Batch markers can be created using independent barcode software. The barcodes can
then be read using a barcode wand or reader. Any type of Batch marker can be encoded
into a barcode using the same control characters used to build up a batch marker.
This example shows a barcode encoded to start a batch:
//S = Start Batch
216 = Batch Name
//I = User ID is Fred
• A barcode with up to 25 characters (including spaces) can be read into the recorder
using a USB ASCII barcode reader.
To Next Page
Loading...
