43-TV-25-30 Iss.6 GLO Aug 07 UK 135
Pwd Net Sync Messages
Certain selections may cause the recorder to display specific messages when an entry or
action has been exicuted. Here are some examples of some messages that may appaer
during Pwd Net Sync setup.
This warns you you are changing the
recorder Type in the Group;
Slave, Master or Stand Alone
This may occur if someone is accessing
the same group of recorders.
This message will appear when the
recorder is scanning the network
All recorders in this group have had their
passwords synchronised successfully
Examples of messages that may appear during Password NetSync set up
To Next Page
Loading...
