124 43-TV-25-30 Iss.6 GLO Aug 07 UK
• Alarm Screen - Select which screen is to be displayed when any pen goes into an
alarm state. Only changes colour if Mark on Chart is enabled in the “Alarms Menu”
on page 68
• Alarm Screen Name - Only active if Alarm Screen is enabled
• Replay Screen TO (TimeOut) - If the recorder is in replay mode and there has not been
any user activity for a defined amount of time then the replay screen will return to the
process screen.
• Replay TimeOut - (only active if Replay Screen TO is enabled) Enter how long, in min-
utes, before the replay screen returns to a process screen. Defaults to 10 minutes.
• Menu Bar TO - This feature is only active for screens that have been created in the
Screen Designer software and have been designed specifically without the menu bar
being displayed. The menu bar at the top of the screen will appear on the recorder auto-
matically but can be hidden so the full area of the screen can be displayed. Enter here
the amount of time before the menu bar is hidden.
• Hourly Stamps - This feature is available for when the recorder screen is put into
replay mode. As you zoom out the time stamps on the chart background change from
minutes to hours.
To Next Page
Loading...
Need help?
General
