Xenon/Granit User Guide 81
CORDLESS SYSTEM OPERATION:
XENON 1902G-BF
Note: This chapter applies only to Xenon 1902g-BF cordless scanning systems. It does not
apply to corded scanners, Xenon 1902g/1912, or Granit 1911i/1981i scanners. See
Cordless System Operation: Xenon 1902g/1912 and Granit 1911i/1981i beginning
on page 43 for other Xenon and Granit cordless scanning systems.
How the CCB01-010BT-07N-BF Cordless Charge Base
Works
A cordless charge base provides the link between the cordless scanner and the
host system. The base contains an interface assembly and an RF communication
module. The RF communication module performs the data exchange between the
cordless scanner and the interface assembly. The control assembly coordinates
the central interface activities including: transmitting/receiving commands and
data to/from the host system, performing software activities (parameter menuing,
visual indicator support, power-on diagnostics), and data translation required for
the host system.
The cordless charge base is also a scanner’s instant charge pack charger. Refer to
Charge Information, page 85, for additional information.
To Next Page
Loading...
