Honeywell Xenon 1952H - Page 279

Xenon XP User Guide 261
Scanner Alarm Volume High BT_ORV3 125
Out-of-Range Delay Out-of-Range Delay (Range 0-
3000) *0
BT_ORY#### 125
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 129
Prefix Add Prefix PREBK2## 129
Clear One Prefix PRECL2 129
Clear All Prefixes PRECA2 129
Suffix Add Suffix SUFBK2## 129
Clear One Suffix SUFCL2 129
Clear All Suffixes SUFCA2 129
Function Code Transmit *Enable RMVFNC0 130
Disable RMVFNC1 130
Intercharacter Delay Range 0 - 5000 (5ms increments) DLYCHR#### 130
User Specified
Intercharacter Delay
Delay Length
0 - 5000 (5ms increments)
DLYCRX#### 131
Character to Trigger Delay DLY_XX## 131
Interfunction Delay Range 0 - 5000 (5ms increments) DLYFNC#### 131
Intermessage Delay Range 0 - 5000 (5ms increments) DLYMSG#### 132
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 134
Show Data Format Settings DFMBK3? 134
Enter Data Format DFMBK3## 135
Clear One Data Format DFMCL3 135
Clear All Data Formats DFMCA3 135
Data Formatter Data Formatter Off DFM_EN0 149
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 150
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 150
Data Formatter On,
Not Required,
Drop Prefix/Suffix
DFM_EN3 150
Data Format Required,
Drop Prefix/Suffix
DFM_EN4 150
Data Format Non-Match Error Tone *Data Format Non-Match Error
Tone On
DFMDEC0 150
Data Format Non-Match Error
Tone Off
DFMDEC1 151
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page