Honeywell Xenon 1952H - Page 280

262 Xenon XP User Guide
Primary/Alternate Data Formats Primary Data Format ALTFNM0 151
Data Format 1 ALTFNM1 151
Data Format 2 ALTFNM2 151
Data Format 3 ALTFNM3 151
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 151
Single Scan-Data Format 1 VSAF_1 152
Single Scan-Data Format 2 VSAF_2 152
Single Scan-Data Format 3 VSAF_3 152
Symbologies
All Symbologies All Symbologies Off ALLENA0 154
Codabar Default All Codabar
Settings
CBRDFT 154
Off CBRENA0 154
*On CBRENA1 154
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 155
Transmit CBRSSX1 155
Codabar Check Char. *No Check Char. CBRCK20 155
Validate, But Don’t Transmit CBRCK21 155
Validate, and Transmit CBRCK22 155
Codabar Concatenation *Off CBRCCT0 156
On CBRCCT1 156
Require CBRCCT2 156
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 156
Maximum (2 - 60) *60 CBRMAX## 156
Code 39 Default All Code 39
Settings
C39DFT 157
Off C39ENA0 157
*On C39ENA1 157
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 157
Transmit C39SSX1 157
Code 39 Check Char. *No Check Char. C39CK20 157
Validate, But Don’t
Transmit
C39CK21 157
Validate,
and Transmit
C39CK22 157
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 158
Maximum (0 - 48) *48 C39MAX## 158
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page