Honeywell XYR 5000 Series - User Manual

Wireless Dual Analog Input
Interface Transmitter
User Manual
Americas
900 MHz ISM Band
XYR 5000 Line
34-XY-25-04
Rev. 8
July 2012

Honeywell XYR 5000 Series Specifications

General

Brand	Honeywell
Model	XYR 5000 Series
Category	Transmitter
Language	English

Summary

Section 3: Installation

3.2: Testing Communications

Explains RSSI Diagnostic and Link Test procedures for verifying communication.

3.3: Electrical Installation

Covers wiring instructions for analog inputs and optional input switches.

Section 4: General Configuration

4.4: Setting a User Password

Explains how to set a four-digit password for transmitter configuration.

Section 5: Configuring the RF Communications

5.1: RF Channel Selection

Explains how to select RF channels for reliable wireless communication.

5.2: RF Baud Rate Selection

Details selecting RF baud rates for communication speed and range optimization.

5.3: RF Identification Selection

Instructions for assigning unique RF IDs to transmitters for system management.

Section 6: Configuring the Sampling and Transmission Rates

6.1: Normal Transmission Rate

Explains setting the interval for transmitting data to the Base Radio.

6.2: Normal Sampling Rate

6.3: Abnormal Transmission Rate

6.4: Abnormal Sampling Rate

6.5: Smart Rate Threshold

6.6: Normal Upper and Lower Values

6.7: Software Configuration of Rates and Thresholds

Section 7: Configuring the Process Variable

7.1: Selecting the Units of Measure

7.2: Setting a Measurement Offset

7.3: Trimming the Measurement

7.4: Entering a 22-Point Curve

Section 8: Maintaining the Transmitter

8.1: Changing the Battery

Step-by-step guide for replacing the transmitter battery safely.