Need help?Do you have a question about the Honeywell XNX-UT Series and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Communication Protocol | HART |
| Display | Optional LCD display |
| Gas Types | Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S) |
| Accuracy | Typically ±1% of full scale |
| Power Supply | 12-30 VDC |
| Output Signal | 4-20 mA |
| Operating Temperature | -40°C to +60°C (-40°F to +140°F) |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Enclosure Rating | IP66 |
| Approvals | ATEX, IECEx, CSA, UL |
| Housing Material | Stainless Steel or Aluminum |
| Measurement Range | Depends on gas type (e.g., 0-100% for O2, 0-500 ppm for CO) |
To Next Page
