Basic operations
Noise control
After connecting the earbuds to your phone/tablet, you can control the noise levels using
the following methods:
Method 1: Press and hold the left/right earbud to turn the noise cancellation on or o, and
switch noise control modes according to the voice prompts.
Method 2: Open the Honor Sma Space app, go to the earbuds details page, select Noise
control, and turn the Noise canceling feature on or o.
Dual connections
Enable dual connections
After the earbuds are connected to your phone/tablet, you can enable the dual
connections in two ways:
Method 1: Turn on your phone/tablet (MagicUI 6.0 and above), go to Settings > Bluetooth
> Paired devices, tap the
button to the right of the earbuds name, select More
settings, and turn on Dual-connect.
Method 2: Update the earbuds and the HONOR AI Space app to the latest version, open
the app, go to the details page of the earbuds, open the Dual-connect page, and turn on
Dual-connect.
Steps to connect
1
Enable the Dual-connect function, rest the earbuds in the case and keep the lid open,
press the function button for 2 seconds. When you see the white light blinking,
indicating the earbuds are in the pairing mode, search for the earbuds on device A and
sta pairing.
2 Keep the earbuds in the case and the lid open, press the function button again for 2
seconds to enter the pairing mode, and pair them with device B.
3 After device B is connected to the earbuds, the earbuds will automatically connect to
device A, thus connecting to two devices at the same time.
Sma Multi-Device Switching
When the earbuds are paired with multiple HONOR phones/tablets, enabling the Sma
Multi-Device Switching feature will allow the earbuds to switch audio between devices
based on your usage scenario.
8
To Next Page
Loading...
