honor Earbuds Open - More Settings; Update; Rename Your Earbuds; EQ Sound Mode

More settings
Update
After the earbuds are connected to the phone/tablet, you can update them in two ways:
Method 1: Update through the HONOR AI Space app.
1 Open the HONOR AI Space app and go to the details page of the earbuds.
2 Select Update at the ve bottom and tap Check for updates. When prompted for a
new version, you can download and install and follow the on-screen instructions to
complete the update.
Method 2: Update through Audio Product Manager.
1 Turn on the Honor phone/tablet (MagicOS 7.0 and above), go to Settings > Bluetooth >
Paired devices, tap
behind the corresponding earbuds name to enter the Audio
Product Manager page.
2
Select Firmware update at the ve bottom and tap Check for updates. When
prompted for a new version, you can download and install and follow the on-screen
instructions to complete the update.
Once the update is complete, open and close the lid to reconnect the earbuds to the phone/
tablet.
Rename your earbuds
When the earbuds are connected to the phone/tablet, you can change the Bluetooth name
of the earbuds in the following ways:
1
Turn on the Honor phone/tablet, go to Settings > Bluetooth > Paired devices.
2
Tap the button to the right of the earbuds name, and follow the on-screen
instructions to complete the change.
• e new name will only take eect on the current device, and will not be synced to any
other devices.
• For non-Honor phones/tablets, please refer to the actual operations.
EQ sound mode
When the earbuds are connected to your phone/tablet, follow the steps below to select
your preferred sound eect:
1 Open HONOR AI Space and go to the details page of the earbuds.
2 Tap EQ sound mode and select the sound eect you like according to the on-screen
instructions.
12