AI Translation
Cross-language communication is made easy with real-time translation and voice
broadcast through the earphones, enabling barrier-free and eoless communication
even without knowledge of foreign languages.
Please follow the steps below to activate and use AI Translation.
1 Connect your HONOR phone/tablet to the network and pair it with the earphones.
2 You can activate the AI translation feature in any of the following ways:
• Open the earphone details page in HONOR AI Space, and tap AI Translate.
• On HONOR phones/tablets (MagicOS 9.0 and above), swipe down from the top right
of the screen to access the control center, and tap AI Translate.
3 Wear the earphones and choose between Chat or Interpreter:
•
Chat: Set the translation languages, press on the earphones or tap the button at the
bottom of the screen to sta a conversation. After speaking, press again on the
earphones or tap the button. e page will display the real-time translation and
voice broadcast. Tap to switch to Face to face.
•
e earphones are in Exclusive mode by default. Tap the earphone icon at the
top to switch to Shared mode.
•
Exclusive mode: One person wears the earphones and speaks into them,
while the other person taps the button at the bottom of the screen to speak
and listen to the translation. Both the earphones and the phone can pick up
sound.
•
Shared mode: Both paies wear a pair of earphones each, press the
earphones to converse, and listen to the translation. Only the phone picks up
sound. Shared mode is not suppoed when one earphone is in the charging
case.
• Interpreter: Set the translation language, press on the earphones or tap the button
at the bottom of the screen to sta Interpreter mode. e phone picks up sound
and the translation is played in real-time through the earphones. Press or tap again
to end simultaneous interpretation.
4 You can also tap > Loop recording for continuous conversational translation. e
phone will continuously pick up sound and automatically recognize the language.
Please complete one sentence before staing the next.
Basic operations
10