Enable or Disable a SIM Card
Go to Settings > Mobile network > SIM management, and enable or disable a SIM as
needed.
Once disabled, a SIM card cannot be used for calling, messaging, or accessing the Internet.
Dual SIM Settings
If your phone has two SIM cards you can set the default mobile data SIM and the
default calling SIM, and enable call forwarding between the two SIM cards.
feature applies to dual-SIM devices only.
Set the Default Mobile Data and Default Calling SIM Cards
Go to Settings > Mobile network > SIM management and set SIM 1 or SIM 2 as the default
mobile data or default calling SIM card.
Enable Call Forwarding Between SIM Cards
After enabling call forwarding for both SIM cards, if incoming calls cannot reach one of the
SIM cards, they will be forwarded to the other one.
feature requires the of your carrier. For details, contact your carrier.
1
Go to Settings > Mobile network > SIM management > Call forwarding between SIMs.
2
Select a call forwarding mode and turn on the corresponding switch.
Call forwarding between two SIM cards will be enabled when it is for both
SIM cards.
Quickly Switch the Default Mobile Data SIM
If two SIM cards have been installed on your phone, you can use a to quickly
switch the default mobile data SIM card.
1 Swipe down from the top right of the screen to open the Control Center. Turn on SIM
data.
2 Touch the text under until a prompt is displayed, then select a SIM card and touch
OK.
When the prompt is displayed, touch SETTINGS to access the SIM management screen.
eSIM
Embedded-SIM (eSIM) is a SIM card that can be used instead of a physical SIM card.
An eSIM card works in the same way as a physical SIM card, but occupies no space and can
be linked with multiple card numbers. You are free to switch between carriers to the
best deal for you.
Get Familiar
8
13 / 182 12 / 180 13 / 182 12 / 180 13 / 182 12 / 180 13 / 182 12 / 180 13 / 182
To Next Page
Loading...
