Screen sharing Between Your Phone and PC
Connect your phone with a Honor PC to use Screen sharing for cross-device control,
sharing, and editing.
Connect Your Phone to the PC through HONOR Share OneHop
1 Ensure that the PC .
2 On the PC, enable Wi-Fi, Bluetooth, and HONOR PC Manager, and agree to the user
license agreement.
3 On your phone, swipe down from the top right of the screen to open the Control Center,
then enable NFC, Wi-Fi, and Bluetooth.
4 Place the NFC area (NFC sensing area location of HONOR phone) on the back of your
phone against the
label on the PC until your phone vibrates or plays a tone.
5
Follow the onscreen instructions to connect your phone and PC.
Connect Your Phone to the PC by Using Bluetooth Search
1
On your phone, Swipe down from the top right of the screen to open the Control
Center, and enable
.
2
Open HONOR PC Manager (version 10.0 or later), go to Screen sharing > Project phone
to PC > Other ways to connect, and select to search for your phone over Bluetooth.
Place your phone above the keyboard and your PC will searching for your phone.
To check the version of HONOR PC Manager, go to > About. To update HONOR PC
Manager, go to > Check for updates.
3
Follow the onscreen instructions to connect your phone and PC.
Disconnect Your Phone from Your PC
After you have using your phone and PC, you can disconnect them using the
following methods:
• On your PC, open HONOR PC Manager, and click Stop sharing.
• On your phone, swipe down from the top middle or left of the screen to open the
Center, and touch DISCONNECT.
• If your phone and PC are connected via a USB cable, remove the cable to disconnect
them.
Phone and Non-HONOR PC Collaboration
HONOR Connect
38
43 / 182 42 / 180 43 / 182 42 / 180 43 / 182 42 / 180 43 / 182 42 / 180 43 / 182
To Next Page
Loading...
