• Tap the Wi-Fi network that you want to connect to under AVAILABLE NETWORKS.
If an network is selected, you need to enter the password.
• Pull down to the bottom of the menu, tap Add network, and follow the screen
prompts to enter the network name and password to complete the connection.
When the status bar displays , it indicates that the phone is accessing the Internet
through Wi-Fi.
Connect via scanning QR code
1 Go to Settings > Wi-Fi and turn on Wi-Fi.
2 Go to the Wi-Fi setting page on the phone that shares the network, tap the network
that is connected, and get the QR code.
3 Scan the QR code on the phone to be connected to the network and follow the prompts
to access the network.
Some networks may not connection by code scanning. Please refer to the
actual situation.
Transfer Data Using Wi-Fi Direct
You can use Wi-Fi Direct to transfer data between HONOR devices. Wi-Fi Direct allows you
to transfer large to a nearby device more quickly than Bluetooth and without having to
pair the devices.
1
On the receiving device, go to Settings > Wi-Fi and enable Wi-Fi.
2
Go to More settings > Wi-Fi Direct to searching for nearby devices that have
enabled Wi-Fi Direct.
3 On the sending device, touch and hold to select the you want to share, touch ,
and select Wi-Fi Direct.
steps may be if you are sharing directly from an app.
4 Touch the icon of the receiving device to establish a connection, then share the
5 On the receiving device, accept the Wi-Fi Direct transfer request.
go to Files > Browse > Phone > Download > Wi-Fi Direct to view the received
Learn about the Home Screen
Explore your home screen
On the home screen, you can:
• Check the status of your phone or view on the status bar at the top of
screen.
• Swipe left and right to check apps, on-screen cards, and widgets.
Get Familiar
14
19 / 182 18 / 180 19 / 182 18 / 180 19 / 182 18 / 180 19 / 182 18 / 180 19 / 182
To Next Page
Loading...
