Audio Channel Switching with One Tap
Switch to a Output Device During Playback
When playing music or videos through your earphones, you can quickly switch playback to
another device without having to unplug your wired earphones or disconnect your
Bluetooth earphones.
1 Enable Bluetooth on your phone and connect it to wired earphones or a Bluetooth
audio device (such as Bluetooth earphones, a Bluetooth speaker, or a vehicle-mounted
device).
2 After pairing is successful, you will see the Current audio output device or Current
audio input/output device card if you swipe down the panel on your phone.
Touch
on the card to display the audio output devices that are currently available.
Select the device you want to switch the audio to.
If your phone wired earphones with a non-Type-C the audio output channel of
your phone will be switched from device to the wired earphones by default.
Sound quality and
Sound Quality and Sound
Choose the sound quality and sound for a better sound experience.
feature requires your phone connecting to earphones.
Enable DTS:X Ultra Sound
DTS:X Ultra provides more immersive sound quality and a more and natural
hearing experience.
1 Connect the headphones.
2 Go to Settings > Sounds & vibration > Sound quality and and enable DTS:X
Ultra sound .
3 Select Sound style. Select or customize the sound according to the scenario,
such as Music, Movie, or Game.
4 If your headphone model is not automatically recognized, you can manually connect
them in Adjust sound to suit headphones > Other models.
Enable Speaker Sound
1 Go to Settings > Sounds & vibration > Sound quality and .
2 Select Speaker sound . Based on your usage scenario, choose Premium Bass, 3D
Surround Sound or Standard mode.
Enjoy
Life
84
89 / 182 88 / 180 89 / 182 88 / 180 89 / 182 88 / 180 89 / 182 88 / 180 89 / 182
To Next Page
Loading...
