Enroll a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID and follow the instructions to
set or enter the lock screen password.
2 Touch New to begin enrolling your
3 Lightly place any on the sensor area, and swipe left and right to
quickly enroll your During the process, you can slightly lift your to
adjust the angle or position. range of motion should not be too large or too fast.
4 When the enrollment has been completed, touch OK.
You can now place your on the sensor to unlock the screen.
Add in-screen ID
1 Go to Settings > Biometrics & password > Fingerprint ID. Follow the on-screen
prompts to set or enter the lock screen password.
2
Tap New > Add . Enroll your
3
Place your on the in-screen sensing area. Press on the area until the
phone vibrates and release. Repeat this operation with sections of the same
until the enrollment is complete.
4
tap OK.
Once the screen is locked, pick up your phone. An in-screen sensing area will
appear on the screen. Touch the area with the used for the enrollment to unlock the
screen.
Set up animation
Go to Settings > Biometrics & password > Fingerprint ID > Fingerprint animation, and
select the animation
Rename or Delete a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 In the Fingerprint list section, touch an enrolled to rename or delete it.
Identify a Fingerprint
Fingerprint allows you to match your with the enrolled
1 Go to Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 In the Fingerprint list section, touch Identify .
3 Touch the sensor with your recognized will be
highlighted.
Settings
154
159 / 182 158 / 180 159 / 182 158 / 180 159 / 182 158 / 180 159 / 182 158 / 180 159 / 182