Enable Power plan
If Power Saving mode is enabled on your device and the level is higher than 10%,
some functions will be disabled, background apps will be restricted, and visual will
be weakened to reduce power consumption. When the level is lower than or equal
to 10%, stricter power saving measures are taken to ensure the longest standby time. It is
recommended that you enable Power Saving mode when the level is lower than or
equal to 20%.
To do so, go to Settings > (or System Manager > ), and enable Power
Saving mode . A icon will then be displayed in the status bar.
You can touch > Learn more to view details about power saving measures.
Enable Ultra Power Saving mode
After enabling Ultra Power Saving mode, the screen display would go into Dark mode.
would disable most features and apps that may consume power and limit the
of the phone, with only basic features like Call and Messages retained to
extend the standby time. You may also add frequently used apps for emergency
operations.
out the following methods to enable Ultra Power Saving mode:
• Go to Settings > (or go to System Manager > ), and enable Ultra Power
Saving mode.
• When the remaining is lower than 10%, tap TURN ON ULTRA POWER SAVING
MODE on the banner on the top of the screen.
In Ultra Power Saving mode, tap Exit on the upper right corner to exit Ultra Power Saving
mode.
optimization
optimization: system will provide multi-dimensional power-saving
recommendations based on your usage habits and frequency. You can optimize
usage with one tap to extend your device's runtime.
You can optimize in the following ways:
• Manual optimization:
1 Go to Settings > > optimization ( or go to System Manager >
).
2 by selecting features and Seldom used functions, then
choose the optimization suggestions under Power saving tips based on the
actual situation, and tap OPTIMIZE.
Settings
158
163 / 182 162 / 180 163 / 182 162 / 180 163 / 182 162 / 180 163 / 182 162 / 180 163 / 182
To Next Page
Loading...
