• If the large display does not Miracast/cast+, connect a wireless HDMI
adapter to it. Ensure that the wireless HDMI adapter is connected to a power supply.
To check whether the large display Miracast/cast+ and how to enable wireless
projection on it, consult the user guide or customer of the large display
manufacturer.
2 On your phone, swipe down from the top right of the screen to open the Control Center,
and turn on .
3 Swipe down again to show all and enable Wireless Projection. Your phone will
searching for available display devices.
4 In the device list, touch the name corresponding to the large display or wireless HDMI
adapter to complete the projection connection.
After the connection is set up, you can place your phone in landscape mode for a better
display.
Cast PhoneScreen with Wired Connection
Easily connect your phone to larger external displays, such as TVs, using an adapter cable.
setup is for both work and you enhanced viewing on a
bigger screen.
Please ensure to purchase or recommended accessories from an authorized
channel.
Projection Using a Type-C Cable
1
Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your
large display.
2 Connect the Type-C end to your phone and the other end to the large display.
HONOR Connect
43
48 / 182 47 / 180 48 / 182 47 / 180 48 / 182 47 / 180 48 / 182 47 / 180 48 / 182
To Next Page
Loading...
