If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checkfist below.
Any other servicing should be done by an authorized service representative.
A WARNINGA
To reduce risk of personal injury - unplug cleaner before servicing,
PROBLEM POSSIBLECAUSE
Cleaner won't run
Blown fuse or tripped breaker,
The Performance __._._.o_
Indicator is red or
the cleaner won't
pick up or low
suction
Dust escaping
from cleaner
Check fuse or breaker in home. Replace fuse!
reset breaker in home.
Thermal protector activated. Allow Cleaner to COO]for 30 minutes (this will
reset the thermal protector).
Dirt cup full. Empty dirt cup.
Broken or worn belt, Replace belt.
• ........................................................................................_"_o_' _ ........._3, __._ _ "
Nozzle/brushroll clogged. Check nozz]e/brushrolI; remove obstruction/clog.
Dirt cup full. Empty dirt cup,
Hose not installed correctly,
12
To Next Page
Loading...
Need help?
General
