ifaminorproblemoccurs,itusuattycanbesolvedquiteeasilywhenthecauseisfoundbyusingthe
cl)ecklistbelow,
Anyetherservicingel;ou[d bedone byan authorizedservice representative.
ifapplianceisnot workingasit should,hasbeendropped,damaged,left outdoors,ordroppedintowater,takeit to aservicecenter
:_dortocontinuinguse.
WARNING
Toreduce rfskof personalinjury- Unplugbeforecleaningor se_4cing.
PROBLEM POSSIBLECAUSE POSSIBLESOLUTION
Vacuum',.,on't........... : : ;:
run
2,Blown fuseor trippedbreaker. 2,Checkfuseor breakerfl_home. Replace
System Check
Indicator has
turned red
or
Vacuum won't
pick up
or
Low suction
Cord Rewind
does not work
DuSt escaping
from vacuum
1.RinsableFilterandI orFitter
madewith HF.PAmediais dirty,
3, Brokenor worn bolt,
5. Carpetheight setting is
fncorrect,
fusdreset breakerin home.
t. CleanRinsableFilterandor Rlter made
with HEPAmedia- Pg,9 arid tO.
3. Replacebelt - Pg,t2.
iiii!!
5. SetCaNetHeightAdjustmentto appropriatesetting
for carpetbeingcleaned- Pg.&
t, Dirtcup fult.
1.Emptydirt _op_ Pg.9,
Vacuum is
difficult to push
or won't move
forward
,,,.,,,,, ,,
Turbo Tool
brushroll won't
turn
Smoky/burning
smell detected
3.Hosenotins_tled correctIy.
1.Carpetheightsetting is
incorrect.
! 3.ReviewRoseinstallation-Pg.7.
1,SetCarpetHeightAdjustmentknobto
appropriatesel_ingfor carpetbeingcleaned
-Pg.6.
2, Blockage.
1.8eli brokenor st'etched,
2.Removeblockage- Pg.1t
1,ReplacebnJshrolIbelt - Pg, 12,
14 Actual model may vary fr_m images shown,