AIR FLOW
Shown through a schematic section
of
the cabinet
41p...i,...
+-
---
WHEN THE DAMPER BAFFLE OPENS,
12
COLD AIR ENTERS THE FRIDGE VIA
THE INLET PORTS
IN
THE MULTI-FLOW
UNIT.
NOTE: SOME PORTS ARE
INTENTIONALLY BLOCKED OFF.
--
WHEN THE DAMPER (BAFFLE) OPENS
BEHIND THE MULTI-FLOW UNIT, AIR
RETURNS TO THE FREEZER SECTION
VIA THE EXHAUST GRILLE
IN
THE
CENTRE
OF
THE MULTI-FLOW UNIT
AIR FLOW RETURNS TO THE FRIDGE
VIA THE INLET DUCTING.
NOTE: THE DAMPER (BAFFLE)
IN
THE
FRIDGE MULTI FLOW UNIT NEEDS TO
BE
IN
THE OPEN POSITION FOR THIS
TO HAPPEN.
THE
FAN
DRAWS AIR THROUGH THE
EVAPORATOR AND BLOWS
IT
INTO
THE TOP
OF
THE DUCT PANEL,
IT
IS
THEN CHANNELED TO THE
INDIVIDUAL FREEZER BASKETS VIA
8 OUTLET PORTS.
THE EVAPORATOR
FAN
DRAWS AIR
FLOW FROM THE FRIDGE EXHAUST
BACK THROUGH THE EVAPORATOR.
NOTE: THE DAMPER (BAFFLE)
IN
THE FRIDGE MULTI-FLOW UNIT
NEEDS TO
BE
IN
THE OPEN POSITION
FOR THIS TO HAPPEN.
CIRCULATED AIR
IN
THE FREEZER
COMPARTMENT
IS
DRAWN BACK
UNDER THE REAR DUCT PANEL TO
THE EVAPORATOR ASSEMBLY.
WPL00003242_0012
To Next Page
Loading...
