EasyManua.ls Logo

HotSpring Aria - User Manual

HotSpring Aria
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
x Page x x
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure
the safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for
delivery and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and
electrical requirements.
Remember to carefully review the Owners Manual that accompanies your spa, and to register the spa's warranty
within 10 days of delivery. These items, along with other valuable information, will be found in the Owner’s Package
which has been placed in the equipment compartment of your spa, where you will also find its serial number.
Watkins Manufacturing Corporation reserves the right to change features, specifications and design without
notification and without incurring any obligation.
DATE PURCHASED: _________________________________________________________________
DATE INSTALLED: ___________________________________________________________________
DEALER: ___________________________________________________________________________
ADDRESS: __________________________________________________________________________
TELEPHONE: _______________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of
exterior surfaces (decks and gazebos). In addition, some communities have adopted residential barrier codes which
may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or spa) by
children under 5 years of age. Your HOT SPRING spa is equipped with a locking cover that meets the ASTM F1346-
91 Standard for Safety Covers and as a result, is usually exempt from most barrier requirements. As a general
practice, your local Building Department will inform you of any applicable barrier requirements at the time a permit is
obtained for the installation of an electrical circuit. Your Hot Spring dealer can provide information on which permits
may be required.
Hot Spring Spa Pre-Delivery Instructions
Congratulations on your decision to enjoy the finest spa available...
Welcome to the growing family of HOT SPRING spa owners.
HIGHLIFE
®
COLLECTION
Register your warranty
using the QR code below:

Other manuals for HotSpring Aria

Questions and Answers

  • J
    Justin PattonSep 8, 2025
    What to do if my HotSpring Aria Hot Tub water is causing eye irritation?
    • L
      lauriedunnSep 8, 2025
      If you're experiencing eye irritation from your HotSpring Hot Tub water, it could be due to low pH or low sanitizer levels. Adjust the pH, and shock the spa with sanitizer and maintain the sanitizer level.
  • D
    Daniel DaltonSep 10, 2025
    How to fix organic buildup around my HotSpring Aria?
    • J
      Jonathan MurphySep 10, 2025
      Organic buildup or a scum ring around your HotSpring Hot Tub is caused by a build-up of oils and dirt. Wipe off the scum with a clean rag. If it's severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and refill the spa.
  • H
    Hunter HartSep 12, 2025
    What to do if my HotSpring Hot Tub water is causing skin irritation or rash?
    • K
      Kevin HillSep 12, 2025
      If you're experiencing skin irritation or a rash from your HotSpring Hot Tub water, it could be due to unsanitary water or a free chlorine level above 5 ppm. Shock the spa with sanitizer and maintain the sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the spa.
  • J
    Justin KellySep 13, 2025
    What to do if my Moto-Massage® jet is inoperative in my HotSpring Aria?
    • K
      Keith SmithSep 13, 2025
      If the Moto-Massage® jet in your HotSpring Hot Tub is inoperative or erratic, it could be due to closed Comfort Control valves or clogged filters. To resolve this, open the Comfort Control levers and clean the filters.
  • C
    Charles ThomasSep 15, 2025
    How to remove stains in my HotSpring Aria?
    • J
      James KrauseSep 15, 2025
      Stains in your HotSpring Hot Tub can be caused by total alkalinity and/or pH being too low, or high iron or copper in the source water. Adjust the total alkalinity and/or pH. You can also use a metal deposit inhibitor.
  • E
    ericstewartSep 18, 2025
    How to remove scale from my HotSpring Hot Tub?
    • K
      Kristin CookSep 18, 2025
      Scale in your HotSpring Hot Tub is caused by high calcium content in the water, and total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale requires removal, drain the spa, scrub off the scale, refill the spa, and balance the water.

HotSpring Aria Specifications

General IconGeneral
Water Care SystemFreshWater® Salt System
Lighting SystemLED lighting
Control SystemWireless remote control
Heater4, 000w/230v
Pump2 pumps
FiltrationTri-X filter
Warranty5 years equipment
Seating Capacity5-6

Related product manuals