HotSpring Flair User Manual

Page 17
• This Source screen illustrates the current
audio source the spa is using.
• Press ▲ or ▼ soft buttons to change
the desired source: iPod
®
, TV, AUX or
Bluetooth
®
.
To use the BLUETOOTH screen, your
audio BLUETOOTH device must be paired with the spa. On your device,
find My Spa. If you do not see this on your device you may be too far
away from spa. Pair your device and you
will be ready to use the BLUETOOTH.
Audio must be On to use BLUETOOTH
and only one paired BLUETOOTH device
will work at a time.
• Press SETUP SOURCE soft button to
advance to the SETUP Tone, Treble
screen.
• Press the soft button next to ▲ or ▼ to
change the Treble between -5 and +5.
• Press SETUP Tone,Treble soft
button to advance to the Tone, Bass
screen.
• Press the soft button next to ▲ or ▼ to
change the Bass between -5 and +5.
• Press SETUP Tone,Bass soft button
to advance to the BALANCE screen.
• Press the soft button next to ▲ or ▼
to change the Balance between -5
and +5.
• Press SETUP Balance soft button
to advance to the Subwoofer
Volume screen.
• Press the soft button next to ▲ or
▼ to change the Subwoofer Volume
between 0 and 11.
• Press SETUP Subwoofer
soft button to advance to the
CHANNEL screen.
• Press the soft button next to ▲ or ▼
to change the Channel number from
1-5. The Channel number in the spa
must match the channel number on
the Transmitter in the house for the
wireless system to work.
• Press SETUP Channel to advance
to the SETUP SOURCE screen.
Operating Instructions

HotSpring Flair Specifications

General

Water Capacity	325 gallons
Heater	4kW
Dimensions	84" x 84" x 36"
Water Care System	FreshWater® Salt System
Control System	IQ 2020
Pump 2	2-speed, 2.5 HP
Shell Material	Acrylic
Cabinet Material	Everwood® HD
Warranty	5 years