Page 26
Spa Care and Maintenance
c. For the LIFT ’N GLIDE
retractable cover system: Slightly lift the
cover at front of spa, glide (push back until it stops), fold cover in
half and lift cover moving it to the back of the spa. Insert locking
pin into side of lifter to prevent accidental closure.
IMPORTANT: When opening a cover with a retractable cover system, only
use one of these three specific methods. Do not attempt to open the cover
in any other way. Damage caused by improper opening or closing of the
cover is not covered under the terms of the limited warranty.
HOW TO CLOSE THE COVER
1. Standing along side the cover, place one hand on the upper corner
of the cover and gently push forward in the direction of the spa. The
cover will rotate forward to cover half of the spa.
IMPORTANT: For the UPRITE or LIFT ’N GLIDE retractable cover
system, disengage the locking mechanism(s) before pushing the cover
forward.
2. Unfold the cover by lifting the handle located on the top (front) half of
the cover. Allow the unfolded half to fall down onto the spa. The air
pressure created by the cover falling will keep the vinyl skirting from
being trapped between the cover and the spa shell.
To Next Page
Loading...
Need help?
General
