HOUNO Visual Cooking C - Using the Standard Display; Basic Display Operations; Setting Cooking Temperature and Time; Using the Core Probe Temperature

USING THE STANDARD DISPLAY
8 STANDARD USER MANUAL
USING THE STANDARD
DISPLAY
The Standard display provides a friendly and easy way for you to operate and interact with
the oven.
Basic Operations
Start/Stop button
The start/stop button will start and stop any cooking operations on the oven.
Setting the Temperature
Press the temperature button once, the digits will start flashing, use the wheel
to select desired cooking temperature. Press the temperature button once
more to confirm.
Setting the Time
Press the clock button once, the digits will start flashing. Use the wheel to
select the desired cooking time. Press the clock button once more to confirm.
For continous cooking turn the time down until --:-- shows in the display.
Setting the Core Probe Temperature
Press the probe button once, the digits will start flashing, use the wheel to
adjust the temperature. It operates between 30°C - 150°C. Press the probe
button once more to confirm. When the core probe is active the Timer will
read --:-- Deactivate the core probe by holding for 2 seconds.
The core probe is available as an optional extra with C + K Visual cooking
ovens (Not available with B ovens) CombiSlim models have a core probe as
standard.
B oven humidification. This button is only present on B oven displays.
Press and hold the humidity button during cooking to add humidity to the
cabinet.
Press the humidity button once to set time based humidity before starting a
cooking process.