Hoval TopTronic E - Function Name Customization; Function Name Menu Settings; Controller Configuration; Configuration Menu Options

4 214 174 V00 KDT GLT-Modul TTE_EN.docx 12 / 26
Parameters
Designation
Value
Min.
Max.
Comments
R
W
02-067
SO/WI display
0
0
1
Summer/winter operation
display
4
7
20-009
Software version
expansion module 2
0
0
0
Software version expansion
module 2
0
7
20-019
Hardware version
expansion module 2
0
0
0
Hardware version expansion
module 2
0
7
20-203
Version_CommonLib
1.3.0
0
0
Library version
5
7
20-200
Version_VMLib
1.3.0
0
0
Library version
5
7
20-201
Version_L2Lib
1.3.0
0
0
Library version
5
7
20-202
Version_BSPLib
1.3.0
0
0
Library version
5
7
7. Function name
In the Function name menu, it is possible to assign a freely definable name in addition to the standard name of
each function. This is then transferred to the operator level (e.g. for operating mode selection). Both names are
displayed in the parameter level.
7.1. Function name menu
Parameter
Designation
Value
Min.
Max.
Comment
R
W
04-005
Function name
General
0
13
Function name
0
5
8. Configuration
In the Configuration menu, the controller can be reset to the factory settings, and a reference value increase or
reduction can be activated. In addition, it is possible to perform a factory reset under par. 04-045 (reset to factory
settings).
8.1. Configuration menu
Parameter
Designation
Value
Min.
Max.
Comment
R
W
04-045
Commands
No action
Perform command
0 = No action
9 = Reset processor (like power off-on)
21 = Error unlocking
31 = Factory reset
0
5
20-027
Set IBN date
2036-02-06
0
0
Command set commissioning date
5
5
30-066
Alloc. heat/cool
sw. valve input
temp.
0=OFF
Allocation heating/cooling switching input
Temperature request
3
3
30-070
Alloc. heating/
cooling sw. valve
input
0=OFF
Alloc. heating/cooling sw. valve input
3
3
30-054
Allocation
setpoint increase
input
0=OFF
Allocation setpoint increase input
0=OFF, 1=AF, 2=SF, 3=VF1, 4=VE1, 5=VE2,
7=VE1-FE1, 8=VE2-FE1, 9=VE3-FE1,
10=FVT-T-FE1, 12=VE1-FE2, 13=VE2-FE2,
14=VE3-FE2, 15=FVT-T-FE2
3
3