© 2022 Hoymiles Power Electronics Inc. All rights reserved.
23
Single-phase Microinverter HMS-1600/1800/2000-4T-NA
7. Decommission
7.1 Decommission
Disconnect the inverter from DC input and AC output, remove all connection cable from the microinverter,
and remove the microinverter from the frame.
Please pack the microinverter in the original packaging. If the original packaging is no longer available, you
can use a carton box that can hold 5 kg and can be fully closed.
7.2 Storage and Transportation
Hoymiles packages are specially designed to protect components so as to facilitate transportation and
subsequent handling. Transportation of the equipment, especially by road, must be done in a way that can
protect the components (particularly the electronic components) from violent shocks, humidity, vibration,
etc. Please dispose of the packaging elements in appropriate ways to avoid unforeseen injury.
Please examine the conditions of the components to be transported. Upon receiving the microinverter,
you should check the container for any external damage and verify the receipt of all items. Please call the
carrier immediately if there is any damage or if any parts are missing. In case of any damage caused to the
inverter, contact the supplier or authorized distributor to request a repair/return and ask for instructions
regarding the process.
The storage temperature range of microinverter is -40 to 85°C.
7.3 Disposal
• If the equipment is not used immediately or is stored for a long period of time, make sure that it
is properly packed. The equipment must be stored indoors with good ventilation and without any
potential damage to the components of the equipment.
• Take a complete inspection when restarting the equipment after it has stopped operation for a long
time.
• Please dispose of the microinverters properly in accordance with local regulations after they are
scrapped because of potential harms to the environment.
Decommissions
To Next Page
Loading...
Need help?
General
Weight and Dimensions
