HP 1010 - Add a Junk Fax Number; Image TCR

14
set up your fax
hp fax 1010 series
image TCR
Image TCR (transmission confirmation report) is a valuable tool for keeping records of faxes
you send. It prints a Sending Confirm page with a miniaturized image of the first page of
the fax on it. See the following example.
To use image TCR, the
Scan & Fax Mode light must be on (press the button if necessary) and
you must set these Menu options to On: Image TCR and Sending Confirm. Follow these
instructions:
1 Press the Menu button repeatedly until Set Up System displays and press Start/Enter .
2 Use the  buttons to scroll to Sending Confirm and press Start/Enter .
3 Use the  buttons to select On and press Start/Enter .
4 Use the  buttons to scroll to Image TCR and press Start/Enter .
5 Use the  buttons to select On and press Start/Enter .
6 Press Cancel to return to Ready mode.
Tip! Image TCR is unavailable if the resolution is set to Super Fine.