HP 1010 User Manual

1
QUICK
STARTQUICK
STARTQUICK
STARTQUICK
STARTQUICK
STARTQUICK
STARTQUICK
START
1
QUICK
START
load paper
This chapter gives you a quick introduction to the basic functions of your new fax machine.
Please refer to the later chapters for detailed instructions.
load paper
You can load up to 50 sheets of plain paper in the input tray. Before loading the paper,
make sure the paper size is set correctly in the
Set Up System
menu. For more information, see
Paper Size on page 30.
paper type and sizes
The HP Fax is designed to work with a variety of plain papers (cotton bond 70–90 g/m
2
(20–24 lb)) in A4, Letter, and Legal sizes.
Tip! Some papers have a side that’s been conditioned for printing. The “print side” is
indicated on the paper’s packaging. Always load with the print side facing you.
1
Pull the paper tray cover toward you.
2
Fan, neatly stack, then insert up to 50 sheets of paper with the print side facing you.
If necessary, squeeze the paper guide, and move it to match the width of the paper. Be
sure to not bind the paper the paper stack.
paper guide
quick start

HP 1010 Specifications

General

Fax Type	Plain Paper Fax
Memory Capacity	Up to 100 pages
Print Technology	Laser
Print Resolution	600 x 600 dpi
Paper Handling	150-sheet input tray
Compression	MH, MR, MMR
Phone Features	Distinctive Ring