22
basic functions
hp fax 1010 series
receiving via an extension telephone
If you have an extension phone connected to your machine, you can remotely control your
fax machine to start receiving.
NOTE: This function requires that the extension phone is plugged into your fax machine.
1
Answer the call on the extension phone.
2
Press
*9*
(remote receive start code) in sequence when you hear a fax tone.
• Your fax machine detects the code and starts to receive the document.
• The code is preset at the factory. You cannot change the asterisks but you can
select any number between 0 and 9. For more information, see Rcv. Start Code on
page 30.
3
Hang up the phone when your fax machine starts to receive.
To Next Page
Loading...
