Bottom cover
Description Spare part number
Bottom cover for use in models with an optical drive:
●
Pike/natural silver 925326-001
●
Silk gold 925327-001
●
Smoke gray 925324-001
●
Marine blue 925325-001
●
Snow white 925323-001
●
Empress red 925657-001
●
Jack black 925322-001
Bottom cover for use in models without an optical drive:
●
Pike/natural silver 925332-001
●
Silk gold 925333-001
●
Smoke gray 925330-001
●
Marine blue 925331-001
●
Jack black 925328-001
●
Snow white 925329-001
●
Empress red 925334-001
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 32).
5. Remove the optical drive (see Optical drive on page 34), if installed.
To remove the bottom cover:
1. Remove the 2 Phillips PM2.5×5.0 screws (1) that secure the bottom cover to the computer.
Component replacement procedures 41
To Next Page
Loading...
