HP 17 Series User Manual

System board hook
Table 6-8 System board hook description and part number
Description Spare part number
System board hook L22748-001
Before removing the system board hook, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 32).
2. Remove the optical drive (see Optical drive on page 33).
3. Remove the bottom cover (see Bottom cover on page 37).
4. Remove the battery (see Battery on page 40).
Remove the system board hook:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the hook to the computer.
2. Remove the system board hook from the computer (2).
Reverse this procedure to install the system board hook.
Component replacement procedures 49

HP 17 Series Specifications

General

Display Size	17.3 inches
Operating System	Windows 10 or Windows 11
Battery Life	Varies by model and usage
Battery	3-cell or 4-cell Li-ion
Ports	USB Type-A, USB Type-C, HDMI, SD card reader, headphone/microphone combo (varies by model)
Wireless	Wi-Fi 802.11ac or 802.11ax, Bluetooth