Power On Selftest and
PDe
Displays
The primary display for the computer is the system console in conjunction with the status
display lightson the front of the computer.
1. The firstthing displayed on the computer console is a lineof messages along the bottom of
the console screen indicating the selftestprograms are running:
l
TEST nnnn REMOTE: disabled inactive multiple ACCESS FAULT:
yy
While this display is active the amber Attention lightshould be on. This indicatesthat a
testis being performed.
2. When selftestis complete, the console displays a screen similarto the following:
xx ME of memory configured and tested.
Primary boot path:
56/52.6
(dec)
Alternate boot path:
56/52.0
(dec)
Main Menu ------------------------------------------------------------
Command Description
BOot [PRIIALTI<path>]
PAth [PRIIALT] [<path>]
SEArch [DIsplayIIPL] [<path>]
Boot from specified path
Display or modify a path
Search for boot devices
COnfiguration menu
INformation menu
SERvice menu
Displays or sets boot values
Displays hard~are information
Displays service commands
DIsplay
HElp [<menu> I<command>]
RESET
Redisplay the current menu
Display help for menu or command
Restart the system
Main Menu: Enter command or menu>
5-2 Starting the Computer System
J
To Next Page
Loading...
Need help?
General