Battery
Table 5-3 Battery and system board hook descriptions and part numbers
Description Spare part number
Battery L11119-855
System board hook L23206-001
L88007-001
Before removing the battery and system board hook, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 27).
2. Remove the rubber feet (see Computer feet on page 27).
3. Remove the bottom cover (see Bottom cover on page 29).
To remove the battery and system board hook:
1. Remove the four Phillips M2.5 × 4.0 screws (1) that secure the battery.
2. Lift the top of the battery (2), and then remove the system board hook and the battery from the
computer (3).
Reverse this procedure to install the battery.
Component replacement procedures 31
To Next Page
Loading...
