13. Remove the display inverter (3). The inverter is available using spare part number 441628-001.
14. If it is necessary to replace the display panel, remove the four Phillips PM2.5×6.0 screws (1) that
secure the panel to the display enclosure.
15. Remove the display panel (2). The panel is available using spare part number 440711-001.
16.
If it is necessary to replace either of the display hinges, remove the four Phillips PM2.0×3.0
screws (1) that secure each hinge to the display panel.
50 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
