HP 54540 Series - Specifications

Vertical
AN
Time Base
Trigger
Chapter 1: General Information
Specitications
Specifications
The specifications are listed below. Specifications are valid after a 30 minute warm-up period.
Bandwidth (—3dB, dc coupled)
Repetitive (all models) dc to 2500 MHz (equivalent time)
Real Time
HP 54520A de to 2125 MHz
HP 545224 dc to 2500 MHz
HP 54540A dc to 2125 MHz (8 or 4 CH on), de to 2250 MHz (1 or 2 CH on)
HP 54542A dc to 2500 MHz
Rise Time !
Repetitive (all models) <700 ps
Real Time
HP 54520A <2.8ns
HP 54522A <700 ps
HP 54540A <2.8 ns (3 or 4 CH on), <1.4ns (1 or 2 CH on)
HP 54542A <700 ps
Input R (selectable) 1 MQ +1% or 50 2 +1%
Maximum Input Voltage ;
1M Q +250 V [de + peak ac(<10 kHz)]
50Q 5 Vims
Offset Accuracy ” +(1.25% of channel offset + 2% of full scale)
Voltage Measurement Accuracy (dc) 23
Dual Cursor +{1.25% of full scale + (0.032) (V/div)]
Single Cursor +[1.25% of full scale + offset accuracy + (0.016) (V/div)]
Delta-t Accuracy
Repetitive (28 averages) +[(0.005% x delta-t) + (0.1% of full scale)+ 100 ps]
Real Time 4 +(0.005% x delta-t) + (0.2 x sample period)]
Peak Detect +((0.005% x delta-t) + 1 sample period]
Sensitivity @
de to 100 MHz 100 MHz to 500 MHz
Internal 0.5 division 1.0 division
External 0.0225 x signal range 0.045 x signal range
(HP 54520A/54522A)
Auxiliary dc to 50 MHz, 250 mVp-p
14