HP 54540 Series - CRT Monitor; To Adjust the Display

CRT Monitor
These adjustments optimize the characteristics of the CRT Display.
This procedure should not be performed as a part of routine maintenance. Perform the procedure
only when the display has obvious differences from the example in the figure. Skip any part of the
procedure when the display meets the requirement.
To adjust the display
Display the CRT test pattern.
a Press Utility ,thenpress selftest.
b Select misc with the top softkey, then select ert test with the second softkey.
ce Press start test.
RERBKESKERON ONIN]
RRR SOIR CREE
sSheses
easeite
Reeseeseie
iets
Bespoconst
‘eses
GK)
56562353
Display Test Pattern
A-ll