HP 54540 Series - Page 3

The HP 54520 and 54540 Series
Oscilloscopes
This family of digitizing oscilloscopes provides a choice of channel count and sample
rate. The HP 54522A and 54542A have two and four channels respectively and offer
500 MHz repetitive and real-time bandwidth and a 2 GSa/s sample rate. The
HP 54520A and 54540A also have two and four channels respectively and offer
500 MHz repetitive bandwidth, but offer a lower maximum sample rate so less
real-time bandwidth.
Features
This family has a variety of high-performance features:
e Two or four signal channels. Two channel models have a front panel external
trigger.
© Up to 2 GSa/s sample rate
© dc to >500 MHz repetitive (equivalent time) bandwidth
Dedicated knobs for vertical, horizontal, and trigger functions
e 32 Kbytes of memory per channel
# 1 mV to 5 V/div channel sensitivity
* Selectable 50-Q or 1-MQ input resistance on channels and external trigger
e Sweep speeds from 500 ps/div to 5 s/div
e Internal and external trigger to >500 MHz
e Auxiliary trigger to >50 MHz
® Autoscale
e 23 automatic pulse parameter measurements
e Time tagging of sequential single-shot acquisitions
© Easy waveform storage
e 1.44-Mbyte disk drive
© Full programmability over HP-IB
e Connections for hardcopy output
Service Policy
The service policy of this instrument requires replacing defective assemblies. Some
assemblies can be replaced on an exchange basis.