HP 54540 Series - Page 31

Preparing for Use
This chapter shows you how to prepare the HP 54520 and 54540 series oscilloscopes
for use. The following areas are covered in this section.
e Inspection
e Setup
e Cleaning
Following instrument setup is a brief section covering oscilloscope operation. This
section is derived from the quick start guide for these oscilloscopes. If you are
unfamiliar with this oscilloscope’s operation and do not have the User’s Guides, this
section will help you. The topics covered include:
e Connecting a signal
e Making voltage and timing measurements
© Storing and retreiving data
® Printing hard copy